Concrete Curing Equipment and Concrete Curing Blankets for Winter Construction
Concrete Curing in Cold Weather
The Thawzall Concrete Curing System allows concrete work to continue throughout the cold weather of the winter months. This results in more efficient scheduling of construction crews and equipment and helps to maintain a steady work schedule throughout the winter. The Thawzall cold weather concrete curing system works well for thawing sub grades and curing concrete walls, concrete form curing, curing concrete slabs on grade, curing elevated concrete slabs and curing concrete columns without the need for expensive and time consuming heated enclosures. The Thawzall Concrete Curing system can also be used for concrete pre pour warming for cold concrete pouring or for pre warming a concrete form for cold weather construction. Just place the hoses of the Thawzall concrete curing system on the concrete or concrete form that needs to be heated or the concrete that needs curing and cover with the insulated construction blankets and you can work all winter long. Since the Thawzall concrete curing system only heats the area under the insulated concrete blankets, it is much more efficient than heated concrete enclosures for concrete curing. This concrete curing system also works great for curing footings and for winter concrete pouring.
- Setup is faster and less expensive than enclosures for concrete curing
- Hoses and insulated blankets provide more efficient and more uniform heat than concrete enclosures
- The construction blankets and hoses are reusable - LESS WASTE
- The Thawzall concrete curing system doesn't contaminate the work area with harmful fumes or carbon monoxide
- Thawzall heating units are quiet and easy to use
- Adaptable - hoses can be placed to cure concrete in almost any location
R 7.48 Insulated Construction Blankets for Concrete Curing
Insulated Blankets for Concrete Curing
These insulated concrete curing blankets are comprised of eight layers of nominal 1/16" Microfoam insulation, sandwiched by one layer of nominal 7 mil reflective coated poly (one surface only) and one layer of non-reflective poly (black color exterior).
Microfoam insulation in these concrete curing blankets consists of four individual 1/16" sections connected together to make on 1/4" sheet. Additionally, the microfoam is perforated in a density of one hole per square inch.
These concrete curing blankets have been tested for their effective ability to radiate, convect, and conduct heat facing the product toward a 3" airspace. Testing on these concrete blankets was conducted using ASTM C-518-91 as a procedural guide.
Easy to use. These construction blankets need no rewetting, no resealing, and can be used over and over again. After each concrete curing job, expose burlap side to the sun or air. This way, the burlap will dry and the concrete blanket will be ready to use again quickly.
Sizes available
6’ x 25’
12’ x 25’
6’ x 50’
Quantity discounts available
*Sizes less seaming allowances of 2" per seam.
Huge Inventory on Hand
Call 1-800-328-7094
Sales - Rental